1. Name of the motor : JGB37-555 12v 24v high power dc micro geared motor

2. Rated voltage have DC 12V and DC 24V

3. DC 12V ; You can choose the no load speed have :

10rpm/19rpm/30rpm/38rpm/56rpm/89rpm/167rpm/265rpm/500rpm/800rpm  (Per minute)

Rated torque between 0.12 To 7 KG.CM; it is recommended that your project load not exceed the rated torque; select a no load speed in DC 12V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

4. DC 24V ; You can choose the no load speed have :

10rpm/19rpm/30rpm/38rpm/56rpm/89rpm/167rpm/265rpm/500rpm/800rpm  (Per minute)

Rated torque between 0.12 To 7 KG.CM; it is recommended that your project load not exceed the rated torque; select a no load speed in DC 24V, there will be corresponding rated torque and stall torque, please refer to the parameter table below.

5. Direction of rotation of the motor: CW Or CCW ; Support Reversed

6. The shaft shape of the motor : D type, please refer to the size chart below for all dimensions of the motor.

7. Gear material: Metal gears make the motor last longer

8. The speed of the motor can be adjusted using the speed controller. This motor and speed controller are sold in combination.  You can refer to the combination sales introduction below.

9. The motor has standard noise when working. If your project has requirements for the working noise of the motor, please consult us before purchasing. We will give you some suggestions. Thank you.

When the motor is reversed, the working sound of the motor will be greater than the forward rotation, which is normal.

10. This motor is suitable for a variety of micro-automation equipment. As long as you confirm that the motor voltage and torque of your choice are suitable for the voltage and load of your project before purchase, there is no limit to the scope of use of this motor.