As a professional manufacturer of 12mm N20 gear motors, we offer comprehensive customization to meet your exact application needs. Below is the complete list of customizable parameters:

1. Electrical & Performance Specifications

• Operating Voltage (e.g., 3V, 6V, 12V, or custom voltage)

• No-load Speed (RPM range: 100–15,000 RPM, adjustable via gear ratios)

• Gearbox Options:

  • Gear stages (1-stage, 2-stage, 3-stage, or planetary gears)

  • Gear material (metal/plastic)

  • Gear ratio (customizable, e.g., 1:5 to 1:1000+)

• Output Shaft:

  • Diameter (e.g., 2mm, 3mm, D-shaped, flatted, or threaded)

  • Shaft length (standard or extended)

  • Hollow shaft (upon request)

2. Wiring & Connector Customization

• Wire Specifications:

  • Wire length (custom-cut, typically 50mm–500mm or longer)

  • Wire gauge (AWG 22–30, silicone/PVC insulation)

  • Wire color (single/multi-color options)

• Terminal Options:

  • Pre-attached connectors (JST, Molex, Dupont, or OEM-specific)

  • Bare wire ends (tinned/untinned)

  • Waterproof sealing (heat-shrink tubing or epoxy coating)

• Soldering & Reinforcement:

  • Direct PCB solder pads

  • Strain relief (epoxy potting, angled wiring, or sleeve protection)

3. Mechanical & Structural Modifications

• Motor Body:

  • Mounting brackets (L-shaped, U-shaped, or custom flanges)

  • Threaded mounting holes (M2, M2.5, or other sizes)

• Enhancements:

  • Dust/waterproofing (IP54, IP65, or epoxy-sealed)

  • Noise reduction (vibration-damping pads)

• Special Requests:

  • Dual shaft output

  • Encoder/feedback integration (optical/magnetic)

4. Testing & Certification

• Performance testing (load speed, current draw, torque curves)

• Lifespan validation (continuous run tests)

• Compliance standards (RoHS, REACH, or customer-specified)

5. Packaging & Labeling

• Bulk packaging (anti-static bags, trays)

• Retail-ready labeling (barcodes, custom logos, QR codes)